Smile Design & Makeover Aftercare Instructions
Complete post-treatment care guide to protect your investment and maintain your beautiful smile
Recovery Timeline at a Glance
First 24 Hours
Most critical period. Avoid eating hard/sticky foods, avoid hot foods, gentle rinsing only (no vigorous swishing). Continue prescribed pain medication if needed.
Week One
Sensitivity may peak. Avoid staining foods and drinks. Begin gentle brushing with soft-bristled brush. Use salt water rinses. Pain should decrease significantly by day 5-7.
Week Two
Most sensitivity resolved. Return to normal diet (avoid hard/sticky items). Resume flossing gently. Schedule follow-up appointment if needed.
Full Recovery
Resume all normal activities and foods. Continue preventive care routine. Schedule regular check-ups every 6 months.
Daily Oral Hygiene Methods
Maintaining excellent hygiene is the cornerstone of keeping your smile design looking beautiful and lasting for years. Here's your complete daily routine:
Brushing Technique (Recommended 3x Daily)
Choose the Right Toothbrush
Use: Soft-bristled (not medium or hard), electric or manual, with a small head. Avoid hard-bristled brushes which can damage your new restorations.
Select Appropriate Toothpaste
Best Options: Non-abrasive, whitening-safe toothpaste. Look for "low-abrasion" on the label (RDA below 70). Avoid charcoal or high-abrasion pastes that can scratch veneers and bonding.
Brush at 45-Degree Angle
Position brush at a 45-degree angle to the gum line. Use gentle, circular motions rather than harsh back-and-forth scrubbing. Spend 2 minutes total: 30 seconds on each quadrant of your mouth.
Brush All Surfaces
Clean the outer surfaces (facing your cheeks), inner surfaces (facing your tongue), and chewing surfaces of all teeth. Don't forget to gently brush the gum line and tongue.
Rinse Gently
After brushing, gently rinse with water or antiseptic mouthwash. Avoid vigorous rinsing or swishing which can displace temporary materials if you're in the early post-op phase.
⚠ Brushing Mistakes to Avoid
- Hard-bristled brushes can scratch bonded surfaces and veneers
- Aggressive scrubbing causes gum recession and damages composite restorations
- Abrasive toothpastes (whitening, charcoal, baking soda-based) damage veneer glazing
- Immediate brushing after acidic foods—wait 30 minutes to avoid enamel softening
- Neglecting gum line leads to decay under restorations
Flossing: The Essential Step You Can't Skip
Flossing removes food and plaque from areas your toothbrush can't reach. After a smile design treatment with bonding or veneers, flossing is even more critical because decay underneath restorations develops silently. Start gently and gradually increase pressure if your gums are sensitive.
Traditional Floss Technique (Daily, Once Minimum)
Get the Right Amount
Cut approximately 18 inches of dental floss. Wrap the ends around your middle fingers, leaving about 1-2 inches of floss to work with between your thumbs and index fingers.
Gentle Insertion
Gently guide the floss between two teeth using a sawing motion. Do not snap or force the floss, as this can cut your gums or dislodge temporary restorations. Be especially careful around new bonded areas.
Form a C-Shape
Once between teeth, curve the floss into a "C" shape around one tooth and gently scrape from the gum line upward 3-4 times. Then curve around the adjacent tooth and repeat.
Move to Next Tooth Pair
Work your way around your entire mouth, including the back sides of your last molars. Use a fresh section of floss for each tooth pair. This takes 2-3 minutes total.
Rinse & Inspect
After flossing, rinse with water or mouthwash. If you see pink on the floss (bleeding), continue flossing daily—your gums will toughen up and stop bleeding within 1-2 weeks.
Best Floss for New Restorations
Coated/Waxed Floss: Glides more easily and won't fray on rough bonded surfaces. Look for brands like Oral-B Glide, Sensodyne, or dentist-brand floss. Unwaxed floss can catch on new composite bonding and is more likely to tear.
⚠ Common Flossing Mistakes After Smile Design
- Forcing floss between tight teeth—snap it gently or it may dislodge temporary restorations
- Skipping back teeth—decay under back restorations is common and expensive to fix
- Using unwaxed floss on new bonding—it catches and can tear the restoration
- Flossing too aggressively—gentle C-shape motion, not vigorous sawing
- Not flossing daily—even once a week isn't enough to prevent decay under restorations
Water Flosser: An Excellent Alternative
Water flossers (also called oral irrigators) use a pulsating stream of water to remove plaque and food debris. They're especially popular after cosmetic dentistry because they're gentler on restorations and easier to use. Many patients find them more effective than traditional floss, especially around bonded areas.
When to Use a Water Flosser
Best For:
- Bonded surfaces (gentler)
- Tight contacts between teeth
- Implants or dental work
- Sensitive gums
- Easy daily use
Types Available:
- Countertop (most powerful)
- Cordless/Portable
- Shower-mounted
- Faucet-attached
- Travel-sized
Popular Brands:
- Waterpik (most popular)
- Oral-B Water Flosser
- Panasonic EW1411
- Philips Sonicare
- Generic options available
How to Use a Water Flosser (Step-by-Step)
Fill the Reservoir
Fill the water tank with lukewarm water. You can add diluted mouthwash (1 part mouthwash to 3 parts water) if you prefer, but plain water is sufficient.
Select Pressure Setting
Start on the lowest setting. You can gradually increase pressure as your gums toughen. Too high pressure initially can cause gum soreness or damage bonded surfaces.
Lean Over Sink
Place the water flosser tip in your mouth, lean over the sink, and turn it on. The water will flow out, so you need to be over the sink or in the shower.
Guide Along Gum Line
Hold the tip at a 90-degree angle to your teeth. Start at the gum line and guide it along each tooth's edge, moving from back teeth to front. Pause briefly between each tooth for a complete clean.
Clean All Surfaces
Work around the outer surfaces (cheek-facing) first, then inside (tongue-facing) surfaces. Don't forget the back sides of your last molars.
Total Time: 1-2 Minutes
The entire process should take about 1-2 minutes. Use once daily, ideally in the evening after your final meal.
✓ Why Water Flossers Are Ideal After Smile Design
Water flossers are gentler on bonded surfaces and veneers compared to traditional floss, which can catch on rough spots. They're also more effective at removing debris from tight spaces without risking dislodgement of restorations. If you have bonding, composite work, or any temporary restorations, a water flosser is highly recommended during your first 4 weeks of healing.
Best Water Flosser for New Smile Work
Waterpik Ultra (Cordless): Most dentist-recommended brand. The cordless version costs ₹3,000-4,500 and is ideal for regular home use. It has 5 pressure settings, perfect for gradually increasing intensity as your gums heal. Worth the investment for long-term smile care.
⚠ Water Flosser Safety After Treatment
- Start on low pressure for the first week—high pressure can dislodge temporary materials
- Use lukewarm water, not hot—extremely hot water can increase sensitivity and inflammation
- Clean the nozzle regularly—mineral buildup can affect water pressure and cleanliness
- Don't use as a substitute for brushing—use it as a supplement to traditional brushing and flossing
- Empty the reservoir after use to prevent mold growth and bacteria accumulation
Flossing Methods Comparison
Not sure which method is best for you? Here's how traditional floss, water flossers, and floss picks compare:
| Method | Effectiveness | Ease of Use | Cost | Best For | Drawback |
|---|---|---|---|---|---|
| Traditional Floss | Excellent | Moderate (learning curve) | Very low (₹50-200/month) | Natural teeth, tight contacts | Can catch on new bonding; takes practice |
| Coated/Waxed Floss | Excellent | Easy (glides smoothly) | Low (₹100-300/month) | New restorations, bonding | Slightly more expensive than unwaxed |
| Water Flosser | Very Good | Very easy (simple technique) | Higher upfront (₹3,000-6,000) | Bonded surfaces, sensitive gums, easy use | Requires electricity/charging; may splash |
| Floss Picks | Good (not thorough) | Very easy | Low (₹100-200/month) | Quick cleaning, travel | Doesn't reach all areas; less effective |
| Interdental Brushes | Excellent | Easy | Low (₹200-400/month) | Wide gaps, implants, bonded work | Requires correct size for your gaps |
✓ Our Recommendation for You
Best Option: Combination approach. Use coated waxed floss once daily (preferably at night) as your primary method, plus a water flosser 2-3 times weekly for deep cleaning around bonded areas. This provides thorough cleaning while being gentle on new restorations. Cost is approximately ₹200/month for floss + electric flosser maintenance.
What to Eat (and What to Avoid)
First 24 Hours: Soft Foods Only
✓ Safe Foods
- Yogurt (plain, soft)
- Ice cream or gelato
- Smoothies (lukewarm)
- Mashed potatoes
- Scrambled eggs
- Applesauce
- Pudding or custard
- Soup (lukewarm, not hot)
✗ Avoid Completely
- Hot foods/drinks
- Hard/crunchy items
- Sticky candies
- Nuts and seeds
- Staining foods (berries)
- Dark sodas & coffee
- Alcohol
- Spicy foods
Days 2-7: Gradual Return to Normal
By Day 7: Most patients can return to normal diet, but avoid extremely hard items (hard nuts, ice, hard candy) and sticky foods (caramel, taffy) which can dislodge bonding or damage veneers.
Permanent Dietary Guidelines
⚠ Foods & Drinks to Limit Long-Term
- Dark-staining beverages: Coffee, tea, red wine, cola, dark juices (these stain composite bonding even though veneers resist staining)
- Acidic foods: Citrus, vinegar-based salad dressings, sports drinks (soften bonded surfaces)
- Extremely hard items: Hard candies, nuts, ice, bones (can crack or chip veneers and bonding)
- Sticky foods: Caramel, taffy, chewing gum (can dislodge bonding or damage veneer margins)
- Hot foods/drinks: Very hot beverages and foods can increase sensitivity on newly treated teeth
Pro Tip: If you do consume staining drinks like coffee, use a straw and rinse immediately with water. This minimizes direct contact with your teeth and reduces staining risk significantly.
Managing Tooth Sensitivity
Sensitivity is normal after smile design treatments, especially with bonding or veneer placement. It typically peaks on Day 3-5 and resolves within 2 weeks. Here's how to manage it:
Immediate Relief (First 2 Weeks)
🧊 Cold Sensitivity
Avoid cold foods and drinks. Avoid ice cream, cold water, and cold air for the first week. Use a straw when drinking beverages to minimize direct contact with treated teeth.
☕ Hot Sensitivity
Let hot beverages cool before drinking. Avoid very hot foods, steaming soups, and hot tea or coffee. Wait until lukewarm before consuming.
💊 Pain Management
Over-the-counter pain relief (ibuprofen 400mg or paracetamol 500mg) taken 30 minutes before eating can help. Follow dosage on the package.
Sensitivity-Relief Products
Sensitivity Relief Toothpaste
Recommended Brands: Sensodyne, Colgate Sensitive Pro Relief, Crest Sensi Relief, or any "potassium nitrate" based toothpaste. Use 2-3 times daily. These work by blocking sensation transmission to the nerve. Results appear within 3-5 days of consistent use.
Fluoride Rinse or Gel
Recommended: Listerine Advanced White (fluoride rinse), or dentist-prescribed fluoride gel. Fluoride strengthens the surface layer of bonding material and reduces sensitivity. Rinse or apply daily for 1-2 minutes.
✓ When Sensitivity Should Improve
- Day 1-2: Highest sensitivity (normal)
- Day 3-7: Peak sensitivity, but manageable with relief products
- Day 8-14: Significant improvement; most patients feel 80% better
- Week 3+: Sensitivity resolves in most cases. If it persists beyond 4 weeks, contact us.
⚠ When to Call Us About Sensitivity
- Severe pain not relieved by over-the-counter medication
- Sensitivity that worsens after week 2 instead of improving
- Pain localized to one specific tooth (possible deep issue)
- Sensitivity lasting beyond 4 weeks
Professional Check-Ups: Essential for Longevity
Regular professional cleanings and examinations are crucial for monitoring your smile design work and catching any issues early before they become expensive problems.
Your Check-Up Schedule
First Follow-Up
Check bonding/veneer adhesion, verify shade match, address any sensitivity issues, confirm comfort and fit of restorations. Quick 15-20 minute appointment.
Second Follow-Up
Thorough check of all restorations, verify margins are properly sealed, ensure no decay development underneath, polish restorations to maintain shine.
Regular Cleaning & Exam
Professional cleaning to maintain brightness, dental exam to check for any issues, X-rays if needed. Standard preventive visit.
Annual Check-Up
Comprehensive exam, professional cleaning, check all restorations for wear/damage, take updated photos for comparison, discuss any new concerns.
What We Check During Your Visit
Restoration Health
- Veneer/bonding adhesion
- Margins properly sealed
- No cracks or chips
- Correct shade still maintained
- Surface polish intact
Underlying Tooth Health
- No decay developing under restorations
- Gum health (no recession)
- Bite alignment (no changes)
- Root health (via X-rays)
- No sensitivity issues
Overall Smile Health
- Bone levels stable
- No new spacing issues
- Restorations functional
- Aesthetic appearance maintained
- Patient satisfaction confirmed
✓ Benefits of Regular Check-Ups
Early detection of issues can save thousands. A small problem caught at a 6-month visit might cost ₹2,000 to fix, but if left until decay spreads, it could cost ₹15,000+. Regular check-ups also help us monitor the longevity of your restorations and recommend refreshes before major issues develop.
Common Post-Treatment Concerns
My bonding or veneer feels slightly loose. Is this normal?
A tiny bit of movement (less than 1mm) is normal in the first week as the adhesive fully sets. However, if it feels significantly loose or moves more than that, contact us immediately. We can recement it quickly. Don't wait—loose restorations can lead to decay.
I see a small gap between my veneer and my natural tooth. Is it a problem?
Gaps at restoration margins are one of the most common reasons for restoration failure. Small gaps allow bacteria and staining agents to penetrate underneath. If you notice any gap, even if it's tiny, contact us. We can seal it with composite to prevent decay from developing underneath.
My restoration appears to have stains or discoloration. Can it be whitened?
The answer depends on the material. Porcelain veneers cannot be whitened or stained—they maintain their color. However, composite bonding can stain and may be polishable. If it's a deep stain, the bonding may need to be replaced. Professional whitening only works on natural tooth structure, not restorations. Contact us to assess your specific situation.
Can I have professional whitening after my smile design?
Professional whitening only affects natural tooth enamel, not restorations. If you had teeth whitened before your smile design, the shade was matched to that whiteness. If you want to whiten further, you'd need to do it first, then have restorations remade to match the new shade. Discuss with us before whitening. For maintaining current brightness, professional polish every 6 months is your best option.
I bite my cheek or tongue frequently. Will it damage my restorations?
Biting your cheek/tongue won't damage restorations, but it's uncomfortable. If you're biting frequently, your bite might not be perfectly balanced yet. Slight bite adjustments are normal in the first week or two as you get used to the new restorations. If biting continues after 2 weeks, contact us for a bite adjustment.
My gums are swollen or bleeding. Is this normal?
Mild gum swelling and slight bleeding in the first week is normal, especially if margins were placed near the gum line. Swelling should decrease significantly by day 7. Bleeding should stop once you resume flossing and gums toughen up (within 1-2 weeks). If swelling worsens after day 5 or bleeding persists beyond 3 weeks, contact us.
Lifestyle Precautions for Long-Term Results
Activities to Avoid (First 2 Weeks)
Physical Activities
- Strenuous exercise (wait 3-5 days)
- Contact sports (wait 1 week minimum)
- Heavy lifting (avoid first week)
- Activities that cause vibration
- Heat exposure (sauna, steam room)
Habits to Change
- Nail biting or finger chewing
- Pen/pencil chewing
- Ice chewing (even permanently)
- Using teeth as tools
- Clenching or grinding (discuss with us)
Other Precautions
- Smoking (increases staining risk)
- Alcohol use (wait 48 hours)
- Kissing intensely (wait 48 hours)
- Sleep position (sleep upright if possible)
- Stress/jaw tension (relax jaw)
⚠ Especially Important: Teeth Grinding/Clenching
If you grind or clench your teeth (especially at night), your smile design restorations are at risk. Grinding can crack veneers and wear down bonding. If you have a grinding habit or suspect bruxism, wear a night guard every night. Discuss this with us during your consultation—we can provide or recommend a protective guard. This is one of the most important things you can do to protect your investment.
Daily & Weekly Maintenance Checklist
Daily Routine (Every Day)
Morning
- ☐ Gentle brush (soft-bristled)
- ☐ Non-abrasive toothpaste
- ☐ Floss or water flosser
- ☐ Antiseptic mouthwash rinse
After Meals
- ☐ Rinse with water
- ☐ Avoid immediate brushing if acidic
- ☐ Wait 30 mins before brushing
- ☐ Use straw for staining drinks
Evening
- ☐ Gentle brush (2 minutes)
- ☐ Daily flossing
- ☐ Water flosser (optional)
- ☐ Fluoride rinse
Weekly & Monthly Tasks
Weekly
- ☐ Replace toothbrush (if worn)
- ☐ Deep clean water flosser
- ☐ Check for food buildup
- ☐ Inspect restorations visually
Monthly
- ☐ Refill toothpaste/mouthwash
- ☐ Schedule any needed appointments
- ☐ Review if sensitivity remains
- ☐ Check smile in mirror for changes
Every 6 Months
- ☐ Professional cleaning visit
- ☐ Comprehensive exam
- ☐ Take updated photos
- ☐ Discuss any concerns with dentist
What to Do in Emergency Situations
⚠ If Your Restoration Breaks or Falls Off
DO: Call us immediately. Most breaks can be repaired or replaced quickly. Save any pieces. Rinse your mouth with salt water. Avoid eating on that side of your mouth.
DON'T: Try to reattach it yourself. Don't use super glue or other adhesives. Don't wait more than a few days—the underlying tooth can start to decay quickly if unprotected.
⚠ If You Have Severe Pain
Likely Cause: Deep decay under the restoration (if pain persists beyond 2 weeks), or occasionally nerve damage (rare).
Action: Call us immediately for an emergency exam. Take over-the-counter pain medication while waiting. Apply cold compress to the area (10 minutes on, 10 minutes off).
⚠ If You See Damage or Cracks
Even small cracks or chips: Contact us to schedule an appointment within 1-2 weeks. Small damage can be repaired easily. If left unrepaired, cracks can spread and eventually require full replacement.
⚠ If You Develop a Cavity Under Your Restoration
How you'll know: Brown/black discoloration visible at the margin, decay smell, sensitivity that worsens over time (not improves).
Action: Contact us immediately. The sooner we catch decay, the smaller the cavity we need to treat. Decay allowed to spread can compromise the underlying tooth structure.
✓ Emergency Contact Information
Call us at: +91 72086 67500
Email: contact@rathidentalcare.com (for non-urgent issues)
Emergency after hours: Call the clinic number—there's an emergency line in the voicemail
We can usually see emergency cases within 24 hours. Don't wait if you have severe pain or visible damage.
Frequently Asked Questions About Aftercare
How long until I can eat normally after smile design treatment?
Timeline: Soft foods for the first 24 hours, gradually return to normal by day 3-5 for most patients. By day 7, most people can eat anything except extremely hard or sticky items. Hard/sticky foods should be avoided long-term (permanently) to protect your restorations.
Can I smoke or drink alcohol after treatment?
Alcohol: Wait 48 hours before consuming alcohol—it can increase inflammation and slow healing. Smoking: We strongly recommend quitting entirely. Smoking stains teeth and restorations, slows healing, increases infection risk, and significantly reduces restoration longevity. If you do smoke, wait at least 48 hours and know it increases staining risk.
When can I resume exercise or sports?
Light exercise: Walking or gentle activity within 24-48 hours is fine. Moderate exercise: Jogging, cycling within 3-5 days. Strenuous exercise or contact sports: Wait 1-2 weeks. Heavy sweating and elevated blood pressure can increase inflammation. Contact sports pose a risk if you get hit in the mouth.
Is it safe to use a whitening toothpaste after smile design?
Absolutely not. Whitening toothpastes are too abrasive for new bonding and veneers. They can scratch the surfaces and dull the finish. Use only non-abrasive, low-RDA toothpaste (RDA below 70). We recommend sensitivity-safe toothpastes like Sensodyne or dentist-prescribed brands.
How often should I replace my toothbrush after treatment?
Replace your soft-bristled toothbrush every 3 months, or sooner if bristles are frayed or worn. Worn bristles don't clean effectively and can damage restorations. Electric toothbrush heads should be replaced every 2-3 months as well.
My bonding looks duller than when it was first done. Is this normal?
Yes, it's normal. Composite bonding naturally loses some shine over time due to surface scratches from brushing and eating. However, this is easily remedied with professional polishing every 6 months, which restores the glossy finish. Come in for a quick 10-minute polish appointment to make your smile look brand new again.
Questions About Your Smile Design Aftercare?
We're here to help. If you have any questions or concerns about caring for your new smile, contact us anytime. Your smile's longevity depends on proper aftercare, and we want to ensure you're getting it exactly right.
Chat With Us on WhatsAppNeed Professional Care? We're Here.
Vrindavan Society, Majiwada
Thane West, Maharashtra 400604
Phone: +91 72086 67500
WhatsApp: +91 72086 67500
Website: rathidentalcare.com
Professional aftercare support for your smile design and makeover. 16+ years of expertise in cosmetic dentistry.



